STANDARD FEATURES:

120/230 Volts, 60/50 Hz Power Input

0-10 Volts DC tension signal output

Output versions include 0-75 psi pneumatic, 0-10V isolated & non-isolated, and 0-90 V, 45 V, or 24 VDC

Auto/manual control mode

Emergency stop feature

Meter Damping - no vibration of needle

Soft start capability - activated by low tension or external contact

Status Lights - show activity of functions

Analog tension meter

OPTIONS:

(H6) Remote Operator Device Configuration. Front panel with operator devices attached to controller with 6' cable.

(DM) Digital Meter

(NSM) Non-standard meter scale

Taper Tension control for Roll Follower (TTF) or Sonic Input (TTS)

(RPA) Remote Pneumatic Assembly - includes servo valve, filter, & regulator on metal bracket.

(RSV) Remote Servo Valve Enclosure - Servo valve in enclosure

(RTA) Remote Tension Amplifier - allows external tension signal.


Power Input: WH-D WH-P WH-V	115/230 Volts 60/50Hz Single Phase @1/2 amp 120/230 Volts 60/50Hz Single Phase @ 1 amp 120/230 Volts 60/50Hz Single Phase @ 5 amps
Output Control Range: WH-P WH-V	0,5 to 75 psi (,03 to 5,17 bar) 90 Volts DC, 45 VDC, 24 VDC, all @ 4 amps 180 VDC @4 Amp and 230 VAC input
Tension Signal Output	0 to 10 VDC
Enclosure	Steel, powder resin painted, NEMA 1,
Weight	26 lbs. (11.8 kg)
Air Connections: WH-P In Out	3/8 inch plastic tubing (5/16", 8 mm optional) 1/4 inch plastic tubing (6mm)
Air Input Requirements: WH-P	80 psi regulated and filtered to 5 micron
Transducer Signal	500 millivolts DC per pair at rated load
Mating Transducer Cable Connectors	Amphenol MS3106A-10SL-3S
Zero Range	95% of transducer rating, minimum
Calibration Range	25:1
Temperature Range	32^oF to 104^oF (0^oC to 40^o C)
System Accuracy	1% to 3% typical
Tension Meter	Analog, 2%, 1ma, 48 ohm
Output Range	0%-100% Max., Min. = 0-20% of Max.
Manual Output Range	0% to 100% of rated output
Manual Mode Output Range	0-100%
Standard Tension Meter Scales	0 - 1,5,10,25,50,100,150,250,500,1000
Taper Tension Range (option)	0%-100% adjustable
Taper Tension Inputs (option) code TTF ( roll follower) code TTS (sonic input)	10k Ohm minimum potentiometer 0-10 VDC input

Take the DFE Tension Control Survey

DOVER FLEXO ELECTRONICS
Web Tension Control and Indication Equipment

217 Pickering Rd. • Rochester, NH 03867-4630
tel: (603) 332-6150 • fax: (603) 332-3758 • e-mail: info@dfe.com

All information presented in this web site is the sole property of Dover Flexo Electronics and is protected by applicable copyright laws.