|
Would you like complimentary registration to the show?
Complete the registration, and when prompted, input the comp code: 61DOVE
|
Tension
Measurement, Display & Control Solutions
At CPP Expo booth E-9719
 The TI17C Tension Indicator amplifies the web
tension signal from tension transducers to provide an isolated 0-to-10 VDC or
4-20 mA tension signal output to a PLC, drive, controller and/or to a meter
display. Unit features Quik-Cal™
push-button zero and calibration and a single, accessible terminal strip for
fast, simple installation and setup.
Mounting choices include card (5.25 x 4.75”),
bracket (pictured), open bracket, and full enclosure. The TI17C is CE-marked in
enclosure. The TI18C operates on 24 VDC and is CE-marked in all versions. An
optional Tension Limit Switch serves as an alarm trigger for web break prevention
or critical tension alert. More info .
The STR
Segmented Tension Roll transducer be will be shown in a system demonstration
that displays separate tension readings from several roll segments along the
same idler roll.
 The STR transducer is a concept extension of
DFE’s popular Tension Roll® Transducer, a robust dead-shaft idler roll with
integrated tension sensors. Providing the capability to measure tension at
multiple points along the same roll face, the Segmented Tension Roll represents
a specialized use of tension measurement in a converting environment.
Find out
more .
 The
iAmp2™ Inline Tension Transducer Amplifier— an iPod-size device that boosts the
low level tension signal input from a DFE tension transducer and puts out an
isolated 0-to-10 Vdc web tension signal for use by a PLC, drive or other
control electronics. Unit features choice of input/ output connection types and
Quik-Cal push-button Zero and Calibration for fast setup.
Terminal strip I/O is shown in picture. More info .
|
